|
Requirement :
|
Bid for - Item rate contract for Supply of civil maintenance items at AIIMS Bathinda - Stone Aggregate (Single size) 10mm nominal size, Stone Aggregate (Single size) 20mm nominal size, "Stone Aggregate (Single size) 40mm, nominal size", Portland Cement (OPC-43 Grade), White Cement, Coarse sand (zone III), Fine sand (zone IV), Twisted steel/ deformed TMT bars Fe- 500D, Vitrified floor tile conforming to IS 156222006 group (B1a), 30cm x 30 cm (anti Skid), 40cm x 40 cm, 60x60 cm, "Ceramic Glazed tiles 1st quality 5 mm thickness in all colour shades and designs of white, Ivory, Gray, , Fume Red brown etc", "Ceramic/Rectified Glazed Wall Tiles tiles 1st quality in all shades, designs, & etc", 30cm x 30 cm - 5mm thick, 20cm x 30cm (Wall Tiles) 6-9mm thick, 45cm x 30cm (Wall Tiles) 6-9mm thick, F.P.S. (non modular) clay fly ash bricks class designation 7.5, Kota stone slab 25mm thick (rough chiseled), Granite of any colour, 18 mm thick (Slab area above 0.50 Sqm), Mild Steel Square Bars, "Mild steel tubes hot finished welded, type", Mild steel flats upto 10mm thickness, "Interlocking C.C. paver block ( 60 mm, thick, M-30)", Galvanised steel corrugated sheets, "SBR Latex (Styrene Butadiene) (Bonding Chemical for mortar and, concrete repair works)", "Tile Grouting Chemical (water, resistant)", Bitumen Sheet with coal tar, "Welding Rod Size 3.15mm x 350mm, (Pack of 20)", Polycarbonate Sheet 10mm thick, "Bamboo (Minimum Length 20ft-25ft, with Higher dia)", "Balli (Minimum Length 10ft-13ft with, Higher dia)", Water Proofing material / Compund for concrete and mortar, ARALDITE, BRICKS, HAND GLOVES, TILE CUTTING WHEEL 4", Steel cutting wheel 4 ", Grinding Wheel, Folding ladder 6 Ft, Folding Ladder 5 Ft, Folding Ladder 4 Ft, Tasla, G. I Bucket, Kassi, Cheni 1 ft , Hammer 1 kg, Hammer Drill, Stone Cutter 4", Safety Belts, Measuring tapes 5 m , Measuring tapes 30 m , 24 inch pipe wrench, 18 inch pipe wrench, Slide Wrench 12", Monkey Plier, Screw Driver, Small Hammer, Hexa Blade with frame, Putty Blade 8'', Tool Bag, Wall Putty, Wood Cutting wheels 4'', Marble Cutting wheels 4'', MS Chisel 1 Ft, Angle Grinder 4'', Hammer Bit 6 mm, Hammer Bit 8 mm, Hammer Bit 10 mm, Hammer Bit 16mm, Plier.
Qty 1
|
