|
Requirement :
|
Tender for Mgnregs Works Material Supply - Quarry Muck, Stone Aggregate 40 mm , Stone Aggregate 20 mm , Stone Aggregate 10 mm , Coarse Sand (zone III), Portland Cement, Wall form panel 1250x500mm, Stone for masonry work, Solid block Size 30x20x15 cm, GI pipe 50mm dia, GI pipe 40mm dia, Vibrator (Needle type 40 mm), Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper, Red oxide zinc chromate primer, welding by electric plant, Galvanized steel L or J hooks, GI trafford profile sheet 0.35mm thick, wire nails, GI chicken mesh, PVC pipe 63 mm outer dia 4kgf/cm2, PVC elbow 63 mm dia, PVC bend 63 mm dia, PVC tee 63x63x63 mm dia, PVC end cap 63 mm dia , PVC reducer 63x50 mm dia, Second class kali wood in planks, second class kali wood in scantling, Twisted steel /deformed bar, Binding wire, Structural steel such as tees , angles , channels and R.S. joists, Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), Factory made door frame size 50x47 mm with wall thickness 5 mm made of singlepiece extruded profile, 35 mm thick factory made solid panel PVC door shutter of single piece extrudedprofile non decorative finished (Matt finished), Fine sand (zone IV), Premium acrylic emulsion of interior grade, having VOC content less than 50gm/litre, Vitreous China orrisa type w.c. pan size 580 mm, Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessoriesand flush pipe), 100 mm S.C.I. trap with vent heel, Vitreous china flat back wash basin 550x400 mm, 15 mm C.P.brass tap, C.P. brass waste 32 mm, C.I. bracket for wash basin and sinks, PVC pipe 25 mm outer dia. 10kgf cm2, PVC pipe 63 mm outer dia . 6kgf/cm2, Brass bib-cock-15 mm dia, 15 mm PTMT bib cock, Polyethylene water storage tank with cover and suitable locking arrangemnet, Interlocking C.C. paver block (80 mm thick, M-30), Mild steel round bar 12 mm dia and below, Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc., Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shadesand designs except burgundy, bottle green black, Mild steel hooks, 200 mm Aluminium aldrop, Iron hooks & eyes 100 mm, Flats up to 10 mm in thickness, Vitrified floor tile 60x60 cm, Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement, Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre, Water proofing cement paint, Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), Manglore tiles 20mm thick, Flats exceeding 10 mm in thickness, Mild steel plates, Mild steel rivets, Mild steel sheets for tanks, Grafted mango sapling, Cowdung, Bonemeal.
|
