|
Requirement :
|
Material Work- Anganwadi No 41 Contruction Ward 11 -Stone Aggregate(single size) 40 mm nominal size, Stone Aggregate(single size)20 mm nominal size, Coarse sand (zone III), Portland Cement, Stone for masonry work, Through and bond stone size 24 x 24 x 39cm, Stone Aggregate(single size) 10 mm nominal size, Solid blocks of size 30x20x20cm, Solid blocks of size 30x20x15cm, Solid blocks of size 40x20x10cm, Structural steel such as tees, angles, channels and R.S. joists, Red oxide Zinc chromate primer, Adjustable span ESO+SI (2.35-3.40), Adjustable telescopic prop 3 m (2.02-3.75m), Second class kail wood in planks, Second class kail wood in scantling, Hollock ballies 125 mm diameter, Beam clamp 300-380 mm (450-1070 mm), Twisted steel/deformed bars, Fine sand (zone IV), 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish, Anjili wood scantls, Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, Bright finished or black enameled mild steel screws 40 mm, Bright finished or black enameled mild steel screws 20 mm, Anjili wood planks, Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), Mild Steel round bar above 12 mm dia, Flats up to 10 mm in thickness, Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc., Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre, Plastic emulsion paint, Pink primer (for wood), Synthetic enamel paint in black or chocolate shade, PVC pipe 110 mm outer dia. 4kgf/cm2, PVC pipe 25 mm outer dia. 10kgf cm2, PVC pipe 63 mm outer dia . 6kgf/cm2, PVC vent cowl 75 mm dia, Vitreous China orrisa type w.c. pan size 580 mm, Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm S.C.I. trap with vent heel, Vitreous china flat back wash basin 550x400 mm, 15 mm C.P.brass tap, C.P. brass waste 32 mm, C.I. bracket for wash basin and sinks, Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, Polyethylene water storage tank with cover and suitable locking arrangemnet, Iron hooks & eyes 100 mm, Anodised Aluminium tower bolt (barrel type) 200x10 mm, Chromium plated Brass screws 30 mm, Anodised Aluminium handles 125 mm with plate 175 x 32 mm, Chromium plated Brass screws 25 mm
|
