|
Requirement :
|
Tender Invited for Mgnregs-re Etender for Material Supply - , 100 Mm Channel Shoulder 2.5 M Long, 200 Mm Aluminium Aldrop, Bitumen Washer, Boulder 50 Mm to 200 Mm, Coarse Sand (zone Iii), Corner Angle 45*45*5 Mm1.5 M Long, Double Clip (bridge Clip), Epoxy Paint, Fine Sand (zone Iv), Flushing Cistern P.v.c. 10 Its Capacity (low Level) (white) (with Fittings, Accessories and Flush Pipe), G.i Limpet Washer, G.i Pipes 50 Mm Dia, G.i. Pipes 40 Mm Dia, G.i. Plain Washer Thick, Galvanised Steel Bolts & Nuts 6 Mm Dia and 25 Mm Long Round Head with Slots, Galvanised Steel Corrugated Sheets, Galvanised Steel J Or L Hooks 8 Mm Dia, Galvanised Wire Mesh of Average Width of Aperture 1.4 and Nominal Dia. of Wire 0.63 Mm, Gi Trafford Profile Sheet 0.35mm Thick, Gravel 1.5 Mm to 2 Mm, Gravel 5 Mm to 10 Mm, Hire Charges of Concrete Mixer 0.25 to 0.40 Cum with Hopper, M.s.tube 40 Mm Dia, Mild Steel Tubes Hot Finished Welded Type, Polyethylene Water Storage Tank with Cover and Suitable Locking Arrangemnet, Portland Cement, Precoated Aluminium Trafford Sheet 0.450mm Thick, Pvc 45 Degree Elbow 63 Mm Dia, Pvc 45 Degree Elbow 75 Mm Dia, Pvc Bend 110 Mm Dia, Pvc Bend 63 Mm Dia, Pvc Bend 75 Mm Dia, Pvc Elbow 75 Mm Dia, Pvc End Cap 63 Mm Dia, Pvc End Cap 75 Mm Dia, Pvc Pipe 110 Mm Outer Dia 6 Kg/cm2, Pvc Pipe 160 Mm Outer Dia., Pvc Pipe 160 Mm Outer Dia., 4kgf/cm2, Pvc Pipe 32 Mm Outer Dia. 10kgf/cm2, Pvc Pipe 63 Mm Outer Dia. 4 Kgf/cm2, Pvc Pipe 75 Mm Outer Dia 4 Kgf/cm2, Pvc Pipe 75 Mm Outer Dia 6 Kgf/cm2, Pvc Reducer 110*75 Mm Dia, Pvc Reducer 63x50 Mm Dia, Pvc Reducer 75x63 Mm Dia, Pvc Socket/coupling 63 Mm Dia, Pvc Socket/coupling 75 Mm Dia, Pvc Tee 110*110*110 Mm Dia, Pvc Tee 63x63x63 Mm Dia, Pvc Tee 75x75x75 Mm Dia, Red Oxide Zinc Chromate Primer, Roofing Paint for Iron Sheets in Red Colour, Second Class Kaili Wood in Planks, Second Class Kaili Wood in Scantling, Single Clip, Solid Blocks of Size 30x20x15cm, Solid Blocks of Size 30x20x20cm, Solid Blocks of Size 40x20x15cm, Stone Aggregate(single Size) 10 Mm Nominal Size, Stone for Masonry Work, Through and Bond Stone Size 24 X 24 X 39cm, Twisted Steel/deformed Bars, Vibrator (needle Type 40 Mm), Wall Form Panel 1250*500mm, Welding By Electric Plant, Wire Nails.
|
